2800 שח

 

Introducing

Phoenix Model is proud to present the 90 percent-pre-assembled Cessna 182 size 1.20. This plane is finely crafted from balsa and plywood and, as a result, has a fantastic fly. With such as high quality material, this is one great flying model. The Cessna 182 comes finished with iron-on covering just as you see it here, and the fiberglass cowl and wheel pants are hand-painted to match. Wheels, fuel tank, engine mount, and all hardwares are included. Functioning scale flaps make takeoffs and landings a breeze.. The Cessna 182 ARF is a part of PHOENIX MODEL's complete line of Hi- quality aircraft and accessories.

Technical data

- Wingspan: 2075mm (81.7 in)
- Length: 1624mm (64 in)
- Flying weight: 5.6-5.8 kg
- Wing area: 52.6 dm2
- Wing loading: 95g/dm2
- Wing type: Naca airfoils
- Covering type: Genuine ORACOVER®
- Gear type: Aluminum Hi-grade for main gear and suspension spring wire for nose gear (included)
- Spinner size: Plastic 70mm (included)
- Radio: 6 channel minimum (not included)
- Servo: 8 standard servo: 2 aileron; 2 flap; 2 elevator; 1 rudder; 1 throttle (not included)
- Recommended receiver battery: 4.8-6V / 1200-2000mAh NiMH (not included)
- Servo mount: 21mm x 42 mm
- Propeller: suit with your engine
- Engine: 1.20/ 2-stroke or 1.40/4-stroke glow engine or 20-22cc gas engine (not included)
- Motor: brushless outrunner 1600-2200 W, 450 KV (not included)
- Gravity CG: 85 mm (3.3 in) Back from the leading edge of the wing, at the fuselage
- Control throw Ailerons: Low: 10mm up/down, 10% expo; High: 12mm up/down, 10% expo
- Control throw Elevators: Low: 10mm up/down, 12% expo; High: 12mm up/down, 12% expo
- Control throw Rudder: Low: 30mm right/left, 15% expo; High: 40mm right/left, 15% expo
- Control throw Flaps: Mid: 15mm down; Landing: 20mm down
- Experience level: Intermediate
- Plane type: Scale Civilian
RECOMMENDED MOTOR AND BATTERY SET UP
- Motor: RIMFIRE .120 (not included)
- Lipo cell: 5-6 cells / 5500 – 6000mAh (not included)
- Esc: 80-100A (not included)

Feature

- Designed for compatibility with both GP and EP flight
- Covered in genuine ORACOVER®
- Bolt-on two-piece wing for easy transport and setup at the field
- Removable bottom hatch for easy change lipo battery and set up radio
- Strong Light Weight Construction
- High-quality hardware package included

Colour chart

- White (# 21010)
- Ferrari Red (# 21023)
- Black (# 25071)

Packing

BOX DIMENSION
- 1339mm X 470mm X 263mm (L x W x H)

 
CESSNA 182 SCALE 1:5 ¼ EP/GP ARF 1.20 PH085 PHOENIXMODEL